pi-goal-list-loop-audit

Mission control for autonomous pi.

Interview-drafted goals, an audited task queue, and forever-loops (metric, spec, project-audit) that run for hours. Every goal starts as a drafted contract you confirm — nothing activates sight-unseen. The plugin then writes a durable goal to disk, drives the agent through an agent_end-driven loop, and on each complete_goal spawns an isolated auditor in a fresh pi session to verify the work is genuinely done. Stall recovery, structured decision pauses, and consent gates keep you in charge while it works.

The auditor runs in a fresh session with no extensions, no skills, no prompts, no editor. It has only read / grep / find / ls / bash. It cannot see the implementing conversation. It cannot plant evidence. The implementer cannot fool it.

Why this exists

Most pi goal extensions — pi-goal, pi-goal-x, pi-loop-mode, ralphi, tmustier-pi-ralph-wiggum — let the same agent that did the work also be the verifier. That's the bamboozle trap. The agent that wrote the implementation also says "I'm done", and the loop trusts them.

pi-goal-list-loop-audit separates implementation from verification. Two independent sessions, two independent read paths, two perspectives.

Architectural guarantee

Stage	Protection
Goal intake	Drafting + Confirm/Reject dialog; nothing activates unconfirmed
Implementation	agent_end-driven continuation loop with 5-minute hard backoff cap
Completion	Isolated auditor session + regression_shield: raw command output required per verification-contract item, enforced orchestrator-side

Quick start

Install:

pi install npm:pi-goal-list-loop-audit
pi install npm:@juicesharp/rpiv-ask-user-question   # effectively required — see Recommended companions

Five top-level commands — /goal, /list, /loop, /glla, /review:

/goal                              # drafting: agent grills, you Confirm
/goal "audit the repo"             # no contract clause → agent grills you first (propose is gated on it)
/goal "Step 1. Step 2. Done when: tests pass."   # has contract → starts now
/goal start "fix the flaky login test"          # explicit skip-draft: starts now, no interview (auditor infers the contract)
/goal status                       # show state
/goal pause                        # pause
/goal resume                       # resume
/goal cancel                       # abort
/goal decide                       # re-open the decision picker (v0.28.23)
/goal audit ["focus on payments"]    # one-shot project audit (v0.29.8): fix the non-decisions, present the decisions — findings in .pi-glla/audit-loop/findings.md
/goal verify                       # run the isolated auditor on the current goal now — no agent turn (v0.28.27, renamed from /goal audit in v0.29.8)
/goal tweak "<new objective>"      # edit in place (Confirm dialog)
/goal archive                      # archived goals, newest first
/glla                               # settings UI table · /glla status (unified what's-running view) · /glla key=value · /glla stats · /glla audits [N|full] · /glla postaudit · /glla wipe (nuclear reset, Confirm-gated) · /glla autoaccept=on
/list fix the login bug, add dark mode, write docs   # dump it — the agent shapes it into items, one Confirm
/list plan.md                      # file detected → bulk import, one Confirm (sisyphus/Ralph style)
/list <paste a checklist>          # multi-line paste → same batch flow
/list "fix the flaky test. Done when: npm test green"   # explicit contract → added directly, no interview
/list                              # show the list (add/import are optional no-op aliases — detection routes everything)

(Or just say it: "queue these 10 things…" — the agent manages the list too.)

Order is the default, not the law: auto-advance takes the head (FIFO), but /list next <n> or the agent's list_activate tool picks any item — with subagents, what gets worked next is a choice, not a position. Numbering always matches /list show.

/list                              # show active + waiting items
/list next                         # skip current, activate next
/list remove <n>                   # drop item n from the list
/list clear                        # empty the list
/list cancel                       # stop the whole list: abort the active item + drop all waiting
/loop                              # draft the loop (agent grills; measure is test-run before you confirm)
/loop start "keep polishing the UI"                          # infinite metricless loop (v0.23.6): no plateau, no cap — ends at time=/tokens= or /loop stop
/loop respec                                                  # infinite metricless loop reconciling the codebase against the root SPEC.md / spec.md (v0.24.3) — 2 specs = you pick, 0 specs = drafting, 1 spec = auto-start (v0.24.4)
/loop audit                                                    # project-audit loop (v0.29.0): each iteration audits fresh, appends findings to .pi-glla/audit-loop/findings.md, fixes the top ones — the orchestrator counts open findings and the plateau stop ends it when the well is dry (one-shot version: /goal audit)
/loop start "reduce TODOs" measure="grep -c TODO src.txt | head -1" direction=min
/loop start "shrink the bundle" measure="..." direction=min time=4 tokens=500000   # arbitrary bounds
/loop start "reduce TODOs" measure="..." direction=min branch=1   # scratch-branch mode
/loop start "keep improving SPEC.md" measure=none max=20   # metricless with an explicit cap (v0.23.0)
/loop status                       # iteration, best, stall, recent values
/loop stop                         # halt with summary
/review <goal-id> [off|on|auto|aggressive]   # re-review an archived goal (bypasses the trigger gates)

Metricless loops (measure=none): for genuinely endless work — an ever-improving spec, continuous hardening — where no number means "better". There is no plateau stop (nothing to stall on): the loop ends only at its bounds (max iterations — max=0 is truly unbounded — time hours, tokens budget) or /loop stop. Every iteration must make one real, inspectable change; cosmetic churn is the known failure mode (doorknob-polishing). The drafter offers this when you say there is no number, and tells you the trade-off before you confirm. Work with a finish line is still a /goal.

Anti-repetition (v0.24.0, both loop flavors): the plateau stop watches the number; the stuck ladder watches the work. Every iteration is classified — exact/near-duplicate replies, A-B-A-B alternation, same tool-same-result three times, narration-only streaks, degenerate single-reply repetition — and a stuck iteration swaps the next prompt for a rotating intervention (different approach → different subtask → PROGRESS.md → fix one test failure → review your own diff). Three stuck in a row escalates to a hard reset (banned openings, tool-call-first); five stops the loop with the reason — bounded and surfaced, like plateau. Continuation lines also rotate: identical prompts invite identical answers.

Subcommands match exactly — /goal pause the pipeline sets an objective about a pipeline; only bare /goal pause pauses. (Same rule everywhere, so your objectives can start with any verb.)

Drafting rules: no-args drafts, args-without-a-Done when:-clause get grilled by the agent (proposing is mechanically blocked until you have replied at least once — typed chat or an answered ask_user_question dialog both count), args-with-a-clause start instantly, /goal start skips the interview by explicit command, a file path is bulk direct. A sisyphus-style plan file (checklists, bullets, numbered, plain lines) imports as-is — headings become nothing, items become goals. And the drafter itself batches: asking for "these 50 tasks" in a /list drafting session produces ONE confirmed batch, not 50 dialogs. Note: every list item is audited individually, so at hundreds of items the audit cost per item is the thing to think about.

Drafting is the default for long-running things. /goal and /loop with no arguments — and any vague /list dump — all start a grilling turn that ends in a Confirm dialog. For /loop specifically, the orchestrator test-runs the proposed measure command once and shows the real number in the dialog — you validate the metric before a single iteration burns tokens.

With branch=1, all work lands on a scratch branch (pi-glla-loop/<ts>-<slug>): improvements are committed, regressions are hard-reset (scratch branch only), and on stop you return to your original branch with merge instructions. Requires a clean working tree.

Loop 3 is metric-driven: the orchestrator runs your measure command after every agent turn. The agent never self-reports progress — the loop only believes a number. There is no auditor in loop 3; the metric is the verdict.

A loop never completes. Goal = achievement, loop = process: there is no done= (v0.15.0 removed it — "improve until X" is a /goal). A loop runs until /loop stop, plateau (window=5 non-improving iterations — the well is dry, not "done"), max= iterations, or the arbitrary bounds time=<hours> / tokens=<budget>. And the spec is alive: mid-loop the agent can call propose_loop_refine to sharpen the target or swap the measure — you confirm, the orchestrator test-runs and re-baselines, and both eras stay in history.

Recommended companions

glla is the goal plane — it drives, verifies, and notifies. It does not try to be the whole rig. Four plugins round it out. The first is effectively required — glla's drafting interviews, DECIDE findings, and confirm dialogs are built around structured questions (it degrades to plain-text prompts without it, but that is the fallback path, not the product). The other three are optional; glla works without them:

• @juicesharp/rpiv-ask-user-question — install this one. Structured questions with multi-select and markdown previews: the /goal drafting interview, DECIDE findings, and every confirm dialog render through it. Without it you get prose fallbacks — functional, but not the intended UX.
• @tintinweb/pi-subagents — the Agent tool: parallel Explore / Plan / general-purpose subagents. glla's prompts teach fan-out with ROI (parallelize real work, never ceremony spawning) and brief discipline, and big audit collects genuinely assume this exists. glla's subagent guarantees (the main session owns the goal; workers can't clobber it) are plugin-agnostic, but this is the provider we test against.
• @juicesharp/rpiv-advisor — a second opinion the executor model can request mid-flight: the whole conversation branch is forwarded to a stronger reviewer model, which answers with a plan, a correction, or a stop signal. Drive the session with a cheap/fast model and buy strong judgment per call. Role clarity: the advisor is advisory, never verification — glla's isolated auditor remains the only completion gate.
• @pi-unipi/notify — push beyond the desktop: Telegram, Gotify, ntfy, with per-event routing. glla's built-in pushes cover the local desktop case and fire only where there is something to DO; add this for away-from-desk alerts — route it to critical events only, or every glla pause/verdict pings twice.

Which loop? (the decision rule)

/goal — one thing, judged semantically. Research, features, docs, anything where "done" needs a reader. The isolated auditor verifies against your Done when: contract with quoted evidence.

/list — many things, judged the same way, in turn. Bulk-import a plan or just say "queue these 10 things". Order is the default, not the law: /list next <n> picks any item.

/loop — one thing, as a process that never completes. Three flavors: metric loops (a shell command prints a number that honestly tracks progress — test failures, TODO count, bundle size, coverage %; the metric IS the auditor here, so a fake metric is worse than no loop, and the drafting step test-runs your measure and shows you the real number before you confirm), metricless spec loops (no honest number exists — the loop works a spec file with checkboxes instead; no plateau stop, ends only at your bounds or /loop stop), and /loop audit (a forever project-audit cadence that finds and fixes its own work). There is no finish line ("improve until X" is a /goal); a loop runs until you stop it, the metric plateaus, or a time/token bound trips. /loop with no args drafts one for you — and if a loop is the wrong shape entirely, drafting redirects you to /goal.

Three loops on one state machine

Loop	Command	Status
1. Single ordered goal	/goal "<objective>"	shipped v0.1.0
2. List of goals (a pool, not a FIFO)	/list [show|next|remove|clear]	shipped v0.2.0
3. Process loops (metric, metricless-spec, audit)	/loop start|status|stop|audit	shipped v0.3.0

Each loop is a different policy class on the same status machine.

What this fixes vs. pi-goal-x

Flaw in pi-goal-x	Fix in pi-goal-list-loop-audit
detailedSummary is hand-concat strings	Structured JSON state + native markdown renderer
Stuck-counter has no ceiling — 1-hour waits happen	Hard 5-minute backoff cap, fall through to user notification
Auditor can rubber-stamp after bash true	regression_shield (shipped v0.2.0): auditor must quote raw tool output per verification-contract item; orchestrator rejects evidence-free approvals
pause_goal is fire-and-forget	Clear pauseReason surfaced in status + agent feedback
Vague objective + weak auditor = rubber-stamp	Drafting phase with Confirm dialog + isolated auditor + shield
Esc mid-audit just dies	Escape dialog: complete-without-audit / continue (shipped v0.2.0)
Auditor can't compact — context exhaustion mid-audit	Compaction enabled (v0.4.0); safe because the shield is orchestrator-side
Agent can grow subtasks indefinitely	propose_task_list with 20/5 caps + Confirm dialog (v0.3.0)

Live TUI (always know it's on)

A persistent glla: status segment + an above-editor widget show the current goal/loop at all times: objective, status, elapsed, tokens, next task or loop metric, pause reason, and live auditor progress during audits. If something is running, you can see it — no command needed.

Self-watchdog (liveness is built in)

A 15s heartbeat detects the precise stall condition — active goal/loop + idle session + nothing scheduled + quiet for 60s — and re-fires the continuation itself. Three consecutive zero-tool turns pause the goal / stop the loop. No external watchdog plugin needed. It also recovers stranded audits (v0.29.1): a goal stuck in auditing with no auditor session alive re-runs the stored claim after 90s instead of black-holing. Storm protection: the send→pause→notify path rearms once per cycle and loud-stops after a 6-error brake streak, so a broken provider can't spin forever.

User aborts mean STOP (v0.29.4): Esc-aborting a turn stands the chain down with a named notify (/goal resume to continue) — it does NOT count toward stall warnings, does NOT auto re-fire, and the stand-down survives the heartbeat (v0.29.5). Five consecutive aborts still pause loudly as a backstop. A queued steer interrupt (length/toolResult races) is not an abort and resumes normally.

One active thing (auto-arbitrated)

At most one goal/list-item/loop owns the active slot — activation guards refuse a second live thing in-session, and session loads auto-arbitrate dirty stacked state (v0.29.6): if a pre-guard project persisted a live loop AND a live goal, the one with the most recent activity keeps the slot and the loser is ARCHIVED (recoverable under .pi-glla/archive/ / /loop status), never silently wiped. No picker, no per-start arbitration chores. The queued list is a backlog, not a second live thing — untouched. /glla wipe remains the manual, Confirm-gated clean slate.

Config (one global place, rarely opened)

/glla                                # open the settings UI
/glla model=provider/id              # auditor model override → GLOBAL
/glla thinking=high                  # auditor thinking → GLOBAL
/glla notify='cmd "$1"'              # custom push cmd · unset = auto-detect (notify-send/osascript) · off = silent → GLOBAL
/glla tokenlimit=10000000            # per-goal token budget (default: off) → GLOBAL
/glla tokenlimit=0                   # explicitly no cap (the default)
/glla wedgealert=30                  # hung-command alert minutes (default: 30, 0 = off)
/glla autoresume=on                  # auto-resume goals/loops on ANY session start (default: load HELD, never auto-start — explicit /goal resume, /list resume, or /loop; off: never) — GLOBAL-only (v0.29.5): project-level keys are inert
/glla auditcap=5                     # pause the goal after N consecutive auditor disapprovals (default 5, 0 = unlimited)
/glla aggressivemode=on               # keep-going defaults: autoResume, cap 10, stuck 10, wedge off, quota auto-retry, cap→TODOs
/glla quotaretryminutes=60            # minutes before auto-retrying a quota-exhausted auditor
/glla stuckmax=10                     # consecutive stuck interventions before a loop stops (default 5)
/glla auditfeedbackchars=800         # cap the executor-visible auditor report (default 0 = full report)
/glla autoaccept=on                  # drafts ACTIVATE without the Confirm dialog (v0.29.4: they start immediately — autoResume no longer gates drafts; every draft dialog also offers "always auto-accept" inline)
/glla project tokenlimit=500         # rare per-project override

Resolution per key: project > global > defaults — EXCEPT autoResume, which is global-only (v0.29.5): per-project opt-ins from old versions silently overrode the global hold at launch (the junk-runner incident), so the launch-restore gate and the reviewer-enqueue gate read only the global file now. The auditor defaults to your pi session model. When the session provider is extension-registered the auditor can't auth it — you're told once (info level) with the fix: /glla model=provider/id, set once, rarely touched again. The plugin never picks a model itself. Thinking follows the session too (floor high).

On disapproval, the executor receives the full auditor report by default (auditFeedbackChars=0, since v0.24.9 — a truncated report loses exactly the actionable tail of multi-item <evidence> blocks). Set a positive auditFeedbackChars to cap it. The complete report is always stored in audit history and is available through /goal status regardless.

autoaccept=on skips BOTH the Confirm dialog and the drafting interview floor — every propose_* draft (goal, list batch, loop, task list) activates the moment the agent proposes it, with a notification and a draft_autoaccepted ledger entry (auto-accept is never silent). The seed carries the intent. Since v0.29.4 auto-accepted drafts start immediately — the draft path is decoupled from autoResume, which gates ONLY launch-time restore of persisted state ("load it but don't auto-start it"). For fully unattended rigs you typically want both on; for attended rigs, autoaccept=on + autoresume=off is the sweet spot (new drafts go, old state holds).

Subagents

glla's guarantees here come from glla itself (session-handle discrimination), not from any specific subagent plugin — any Agent-tool provider gets them. Subagent sessions bind extensions too, so glla loads there — by design the main session owns the goal/loop/list; subagents are workers (v0.23.8):

• A subagent session never clobbers the loop's session handle, never runs the restore gate, and never drives continuation — so the heartbeat, wedge alert, and auto-resume machinery always act on the main session. (pi hands a fresh ctx wrapper per event; ctx.sessionManager identity is the discriminator.)
• Subagent tool activity counts as activity for the wedge clock — a long subagent run is work, not a hang.
• With @tintinweb/pi-subagents specifically (the one we test against): read-only agents (Explore, Plan) get no glla tools; general-purpose agents see them but state-mutating calls (complete_goal, propose_*, list_add, pause_goal, …) are refused with "report back to the main agent".

Token guard

Every goal tracks real token usage; crossing the budget pauses the goal. Off by default (opt-in) — set a budget with /glla tokenlimit=<n>. A high value like 10000000 is a runaway threshold, not a big-goal threshold (real research/feature goals legitimately burn 2-4M). Loop 3 doesn't need this cap — it has its own brakes (max iterations + plateau).

Wedge alert

The turn-based watchdogs can't see one failure shape: the session is busy but silent for a long stretch because ONE unbounded command (a test suite that never exits, a dev server) is holding the whole goal hostage. The heartbeat watches the wall clock: busy + no activity for 30 minutes → in-session warning + your configured notify push, once per interval while it persists. Tune with /glla wedgealert=<minutes> (0 = off).

Every other wait is bounded too: continuation retries are milliseconds, stuck backoff caps at 5 minutes then pauses, measure commands get a 10m hard timeout, and the auditor aborts after 10m with zero session activity (infrastructure error, never a verdict).

Compatibility (what goes well, what conflicts)

The Two-Driver Rule: any plugin that drives agent turns on agent_end conflicts — two supervisors scheduling continuations into one session produce contradictory turns. One driver at a time:

• Hard conflicts (do not install together): pi-codex-goal, pi-loop-mode, pi-goal-x, pi-goal*, ralphi, pi-ralph*, pi-autoresearch (active).
• Overlap: @badliveware/pi-compaction-continue — our heartbeat covers stalls while a goal/list/loop is active; both installed may double-nudge.
• Installed-but-don't-run-simultaneously: @tmustier/pi-ralph-wiggum — fine to keep, never run a ralph loop while a goal/list/loop is active.

Goes well with it: see Recommended companions above. pi-chrome too (the research/search path for goals — logged-in browsing with no extra services; standalone search skills like mmx-cli/pi-search-skill are optional conveniences for bulk queries, not requirements).

Overlaps — pick one: @tintinweb/pi-tasks is a second task list next to /list, and in practice the glla list is the task list (queue, statuses, per-item audit trail) while the todos end up the weaker copy. We ran both and removed pi-tasks. If you truly need session-wide dependency DAGs beyond one ordered queue, it exists — but installing both is not the ideal combo.

Two footnotes: (1) extension-registered providers work in the main session but not the auditor's extension-less session — if audits fail auth, set the override once with /glla model=. (2) pi-notify-agent notifies on every turn; glla pushes fire only where there is something to DO (pauses, verdicts, storms, wedge) and work out of the box — with no notify= configured glla auto-detects notify-send/osascript; notify=off silences, notify='<cmd>' customizes.

Files

extensions/
  loops/goal.ts                # /goal + /list commands, agent tools, loop driver
  goal-loop-core.ts            # types, JSONL state, pure helpers
  goal-loop-auditor.ts         # isolated auditor (fresh session, no extensions)
  goal-loop-shield.ts          # regression_shield (pure, dependency-free)
  goal-loop-display.ts         # status line + /goal status rendering
  goal-loop-forever.ts         # /loop measure/parse/plateau helpers
  goal-loop-backoff.ts         # 5-min hard cap
prompts/
  goal-loop-continuation.md    # loop driver prompt
  goal-loop-draft.md           # drafting prompt
  goal-loop-forever.md         # /loop driver prompt
  goal-loop-forever-draft.md   # /loop drafting prompt
scripts/
  smoke.sh                     # live integration harness (tmux + real models)
tests/                         # 614 tests across 58 files, no live pi required (mock-ctx harness drives the orchestrator)
docs/DESIGN.md                 # architectural decisions
PLAN.md                        # milestones, decisions, gates

Detailed design

See docs/DESIGN.md. Milestones and decisions live in PLAN.md.

Installation from source

git clone https://github.com/DraconDev/pi-goal-list-loop-audit.git
cd pi-goal-list-loop-audit
pi install .

License

MIT